the water pipe may also be blocked like the toilet. if the water pipe is blocked, it will also have an impact on our daily life. this requires dredging the water pipe. how can we dredge the sewer? because the water pipe is often blocked, some people intend to expand it. what should we pay attention to when we transform the sewer?
1、 how can we dredge the drain?
1、 in daily use, if foreign matters fall into the pipeline or the pipeline is blocked due to the fault of new installation, the pipeline dredger is generally used to dredge or replace the pipeline directly; some sewer pipes will appear scaling after being used for a period of time, and the inner diameter of the pipe will be easily thinned, which will affect the drainage. this dredging must use high-pressure water to clean the pipe, remove the dirt on the inner wall of the pipe, expand the inner diameter of the sewer pipe, so as to dredge the sewer.
2. if you want to solve it by yourself, you can find a 0.5-1 mm diameter wire, 3-4 meters long, fold it in half from the middle, then twist it into a strand, then bend the two heads in different directions on the side of the single head, then stretch this head into the water pipe, grasp the other end, and tighten it in one direction on the other side. if you encounter resistance and can't twist it, you can go there pull out. don't twist at this time. pull directly. some sundries can be pulled out. repeat several times to clear them.
3. also can use sewer dredger, this product is sold on the market, especially effective for hair, greasy, paper and other causes of blockage dredge, and do not damage the water pipe (including pvc pipe), do not damage the electroplated layer. pour 50-100g of dredger into the sewer. if there is no water in the sewer, add half a cup of clear water. at this time, the pipeline is boiling. after about 20 minutes, flush with plenty of clear water, it can be dredged. in the same way, the chemical reaction of soda and vinegar can also solve the blockage caused by the oil substances adhering to the pipeline.
2、 what should we pay attention to in the renovation of sewers?
1. irrigation test should not be less
after the toilet pipe is fixed, it is irrigation test, because irrigation test is the best way to detect the problem. it can further determine whether there is water leakage in the pipeline and whether the reinforcement joint is firm. if there is no problem with the irrigation test, after fixing the pipe, seal the cement and gypsum on the pipe to ensure that the pipe will not be trampled. only if there is no risk, can we ensure the success of the toilet renovation sewer project.
2. size of pipe treatment
the size and specification of the water pipe is also an important notice of the toilet water pipe reform. first of all, the length of the toilet cannot be too long, because the long pipe will slow down the flow of water, and the flow will naturally become low, and the long pipe is easy to cause congestion, which brings a lot of trouble to the family, and it is also very troublesome to clean and repair.
3. sealing and deodorization treatment
in addition to several precautions, drains need to be sealed to ensure that foreign material is mixed into the next construction period. if any foreign matter enters the pipe, only the water pipe can be replaced, and the cement must be cut off. this treatment is not troublesome at all. in addition to sealing, attention should also be paid to the anti odor treatment of the sewer, because the anti odor treatment can add a layer of protection to the sewer. it is very simple to transform the toilet into a sewer to prevent odor. u-bend or p-bend is added to the sewer pipe. it can effectively prevent the harmful smell of sewage from entering the house, and make the home safe, comfortable and clean.
the above is the solution to the drain blockage caused by jinan pipeline dredging. if you want to know more, please consult us http://www.sggdst.com website.